Survivalist Forum banner

1 - 5 of 5 Posts

·
25 Or 6 to 4
Joined
·
8,006 Posts
Thats not bad (I wish we could have them here in Cali)
Check your laws a bit. I believe there is a parts loophole that allows for spare parts. If it covers your location, Take the springs out. Load 10 rounds and the follower and then drill directly under the follower on both sides of the mag and install two pop rivets on each side so the follower is trapped and can only take 10 rounds.

Store your bodies and followers in one place and your springs and floor plates in a different one. You won't be able to use them but in TEOTWAWKI, a drill and file can remove the rivets and smooth the holes on the inside so they will work.
 

·
Registered
Joined
·
9,546 Posts
I've found them at the gunshows for as little as 10 bucks, and at some of the gunshops for as high as 25 bucks.
If the magazines are new unissued then 17 bucks is about right, use to get the same for 14 bucks but that was a while ago.
 
1 - 5 of 5 Posts
Top