Survivalist Forum banner

721 - 740 of 749 Posts

·
Registered
Joined
·
12,109 Posts
Building a Mk12 "in the wild" SPR clone. Put the Geissele 2-stage trigger in this afternoon. Just need to decide on the optic.

SPR clone.jpg

Details as follows:

  • Aero Precision AR15A4 upper w/ M4 cuts
  • WOA 18” 1x8 SPR barrel with flats cut for the set screws
  • WOA low profile gas block
  • Typical A2 flash hider
  • Knight’s Armament #KM21318 RAS free float tube; rifle length
  • RRA BCG
  • Harris bipod
  • Blackhawk picatinny rail adaptor
 

·
Registered
Joined
·
256 Posts
Building a Mk12 "in the wild" SPR clone. Put the Geissele 2-stage trigger in this afternoon. Just need to decide on the optic.

View attachment 279702

Details as follows:

  • Aero Precision AR15A4 upper w/ M4 cuts
  • WOA 18” 1x8 SPR barrel with flats cut for the set screws
  • WOA low profile gas block
  • Typical A2 flash hider
  • Knight’s Armament #KM21318 RAS free float tube; rifle length
  • RRA BCG
  • Harris bipod
  • Blackhawk picatinny rail adaptor
A nice rifle.
 

·
Registered
Joined
·
256 Posts


My newest Grendel with the upper I built on an existing lower that I already had.

- 18" Criterion stainless barrel with a rifle length gas system
- Tool Craft Bolt Carriage with a JP Headspaced/matched bolt
- Aero precision M4A1 upper and matching enhanced 12" handguard
- BCM Gun Fighter charging handle with the large latch
- JP adjustable clamp on gas block
- Spikes tactical carbon fiber gas tube
- Aero Precision M6 Gama muzzle device
- Vortex Viper PST Gen II 5-25x50 FFP scope
- Warne 20MOA Skeletal scope base

Waiting on a Harris bipod and a vortex scope bubble level as well.
Should be a shooter. Criterion guarantees MOA with match production ammo. Hand loads almost always bring better than MOA, so I will reload Grendel in the not too distant future.
 

·
MortarMaggot
Joined
·
3,391 Posts
A few of my more recent builds.


An A2 build I put together. TNTE 5.56 A2 CL barrel on a Numrich A2 Upper. Anderson Lower & LPK





A few stubby works in progress. This one is mostly done. I've already changed the safety since this pic. Still going to get a different bolt catch/release, maybe another small odd item or two as well. A PSA/FN 10.5" CHF/CL 5.56 upper, Anderson lower with a CMMG LPK.








These next 2 uppers are mostly done. Lowers are mostly done now too, just haven't gotten around to taking any more updated pics since then. First one is a10.3" Centurion CHF/CL 5.56 Barrel on a NoDak Spud upper receiver w/ Aero UPK except the tear drop FA. Anderson Lower CMMG LPK.







-

PSA 10.5" CHF/CL 5.56 upper that I pullet the reciever off & swapped in a NoDak Spud upper with another Aero UPK, except the teardrop FA. Also the Sig Romeo MSR is mounted on an inverted Roger's Tri-Rail












They all have either hard chrome or NiB BCG's.
 

·
Desperta Ferro!
Joined
·
570 Posts
This thread is 10 years old and still going strong. Some really nice builds here, guys. I might post one that finally got its last component installed last week.

Still deciding whether or not the gubmint should have such nice pics of my stolen rifles, those damned blm and antifa creeps! Looting everywhere and everyone, sheesh!
 

·
Registered
Joined
·
33,184 Posts
I'm looking at this gun (for sale) what do you AR shooters think? Advice, comments?
  • Model: BEAST
  • Caliber: 5.56 NATO / .223 Remington
  • Finish: NiB-X Nickel Boron
  • Barrel: Match Grade Chrome Moly Vanadium Steel, 1:7 Twist, 16″ Government Or M4 Profile, Carbine Gas System, Nitromet QPQ Salt Bath Nitrided In The Bore For Extended Life And Accuracy, Nib-X Coated On The Outside For Durability And Heat Dissipation
  • Barrel Twist Rate: 1 x 7
  • Bolt Carrier: M16 Profile, Mil-Spec MP Tested, Nib-X Coated For Reliability And Ease Of Cleaning, Properly Staked Gas Key
  • Lower Receiver: Billet 7075-T6 Aluminum Machined To Mil Spec Dimensions, Front Magazine Well Finger Grips, Nib-X Nickel Boron Coated For Durability
  • Upper Receiver: Mil-Spec 7075-T6 Aluminum Forging With M4 Feed Ramps. Nib-X Coated For Lubricity And Durability
  • Handguard: 8-Sided Tactical Free Float KeyMod Handguard Nib-X Coated
  • Pistol Grip: UTG
  • Stock: Magpul STR, Mil-Spec
  • Weight: 8.5 lbs.
  • Overall Length (Stock Collapsed): 33"
  • Overall Length (Stock Expanded): 36.5"
  • Flash Hider: Stainless Steel

wmd-556-black-ar15-nickel.jpg
 

·
Registered
Joined
·
38 Posts
Great thinking, now the spooks have more data on you and you broomstick. Next a spook will ask you to post pics of your serial numbers and you will be proud to list them. What ever happened to OPSEC??
 

·
Registered
Joined
·
281 Posts
Great thinking, now the spooks have more data on you and you broomstick. Next a spook will ask you to post pics of your serial numbers and you will be proud to list them. What ever happened to OPSEC??
Hmm, I live in a state where I can sell any gun FTF at any time. As a matter a fact, my picture was for a sale ad here locally in Texas.

If you want total darkness and OPSEC, you probably shouldn't be on this forum....just sayin.
 

·
Registered
Joined
·
38 Posts
Hmm, I live in a state where I can sell any gun FTF at any time. As a matter a fact, my picture was for a sale ad here locally in Texas.

If you want total darkness and OPSEC, you probably shouldn't be on this forum....just sayin.
I also live in a semi-free state and can do FTF transactions. Just making the point that posting pictures of your boomsticks online in this current political environment is not smart.
 
721 - 740 of 749 Posts
Top