Survivalist Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
958 Posts
If you use a stain before clear coat it will even up the blotches. It doesnt have to be much and remember that it never turns out like how it looks on the can so go a little darker than you really want. rub a few coats in with an old sock or something, then hit it with some 220 and then do a few good coats of the poly. It wont look much different than it does now, but it will hide the blotches.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top