Survivalist Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
647 Posts
Discussion Starter #1
I seem to remeber running across some do it yourself plans for building the racks for keeping your canned goods in rotation. You know the load on top and use from the bottm type contraption. The ones I've seen on the net can get expensive. Does anyone have or know where to get these plans. If you have made your own, was it difficult, time consuming, worth the time, or easier to just spend the cash and be done with it. Thanks in advanve for any help.

Tbull:cool:
 

·
Registered
Joined
·
7,224 Posts
I built some shelves in a house I had that were higher in the rear by a few inches.
I just loaded new stuff to the rear and let the stock roll forward as I used it.
It was handy enough.
Not a real PITA to build.
 

·
Registered
Joined
·
2,123 Posts
I built a top feed rack between the studs in a basement closet. It hold three rows of cans between studs. I have some pictures I'm going to get some help with posting. I'll try to put a picture of it up soon.
 
1 - 6 of 6 Posts
Top