Survivalist Forum banner
1 - 2 of 24 Posts

· Registered
5,444 Posts
i have a similar ranger. i have 1x10" boards along each side (inside the wheel wells) and across the back with 2x2"corner framing. across the front, the 1x10" is removable to get to the storage. on top of the 1x10's, i have 5 1x12's covering the storage area, extend over the wheel wells, and that allows me to have my bed there. the 1x10's get the sleeping deck above the wheel wells and gives me that much storage underneath. and my bed shell only goes to the top of my cab, it doesn't go higher.
1 - 2 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.