Survivalist Forum banner

daniel defense

  1. Military Weapons Forum
    Are midwest industries ERS flip up sights worth the price? A guy I work with has a set of ERS sights for sale. Since they are used I was going to offer him say 20% less than the retail price. Then I looked at the price. Midwest industries front and rear sight set - $174.95. Magpul MBUS Gen...
  2. Military Weapons Forum
    With Daniel Defense! (I recently had an unsatisfactory experience with Noveske, and am replacing all of my Noveske products, slow but sure!) Specs: -12" AR15 LITE rail -X300 Ultra -Geissele "SUPER V" trigger (designed for Kyle Lamb/Viking Tactics, basically a slightly heavier 3-gun trigger)...
  3. Military Weapons Forum
    I had posted earlier that I was shopping for a Colt 6920/6940. I found a Daniel Defense DDM4-V5 at Cabelas for $1599. I jumped on it. Please post your thoughts on the Daniel Defense product.
  4. Military Weapons Forum
    Hey everybody. I just ordered the complete MOE lower build kit from Palmetto State Armory and I ordered a complete upper from Midway USA. This is my first AR-15 ever. I am probably going to get the PSA stripped lower but does anybody know of anything cheaper that isn't lacking in quality? Thanks!
  5. Military Weapons Forum
    Looking at buying a Daniel Defense complete upper, so who makes a decent lower receiver of somewhat equal value? The upper receiver I am looking at is the Daniel Defense AR-15 DDXV. ~ EDIT ~ Currently I own a Bushmaster AR that was made during the so called "assault rifle ban". A lot of the...
  6. Military Weapons Forum
    Wanting to pick up another AR, what is the general consensus on overall quality of the Colt 6920 versus a Daniel Defense M4? The goal is for a K.I.S.S. go to rifle, without alot of toys mounted on it.
  7. Military Weapons Forum
    I had actually finished it a while ago. I posted a few months back a question on barrel suggestions. I decided to go with the PSA barrel assembly. I've heard no bad reviews, and seem to be top quality. Either way, here are the organs that make up my new franken-rifle :cool: :LOWER: -Del Ton...
  8. Military Weapons Forum
    So as of late I have been arguing (like a child at times) about the downfalls of DPMS, so I will compare MY Daniel Defense agianst My Dpms. I would like to make this thread as a look through my eyes of what I see as problem areas, and to hopefully help some one else make a educated decision or...
  9. Military Weapons Forum
    I am pretty confused there so many maufactures of this gun but which ones the best.
  10. Rifle Forum
    n your opinion what is the best bang for the buck in the semi-auto rifle field? I believe this should also include the availability/price of ammo, firearm reliability, access of spare parts, and accuracy of the firearm. I would also like to know what is the least and most expensive rifle you...
  11. Rifle Forum
    First, let me introduce myself (this is my first post asking a question). I'm Mike, I'm 20, I've been in college for 2 years, and after getting both bored by the courses and disgusted by the lack of simple common sense among both staff and faculty at this school, enlisted in the US Army last...
  12. Firearms General Discussion
    1. I am deciding between 3 guns for SHTF. IF you could only take one right now of my 3 choices what would it be? Keep in mind I plan on buying at least 12 mags for the AR or Glock or 250 rounds of OO Buck and slugs for the Benelli. 1. Daniel Defense M4V7 2. Glock 20 w/ .40 cal barrel & 10mm 6...
  13. Military Weapons Forum
    While researching the purchase of a new AR-15, I came across several forum topics on the M4 Carbine VS midlength debate. It seems that the midlength rifle is a little more reliable then the M4, mainly due to pressures in gas system. The question I have, in most of the debates people keep using...
  14. Military Weapons Forum
    So a little background before I get started, at my company when you work for them for five years they give you a $1500 spending limit on a gun of your choice, you can see I went with Daniel Defense. The model is the DDM4V3, midlength gas system with the 9" Omega X rail installed. The Sling is...
  15. Military Weapons Forum
    Ok I have looked over most of the post and I have not seen Daniel Defense as a good rifle or anything good or bad. I am asking this because I have one in the mail and can’t wait to get it. I understand they cost more than $599 so they maybe out of some peoples price range, but what do you guys...
  16. Firearms General Discussion
    I'm looking to purchase a Daniel DEfense m4v5, and tonight just when I went to place an order on the site I had just had my FFL fax his license to, they went out of stock. Any leads on finding the DD m4v5 in stock at a good price? Thanks in advance.
  17. Military Weapons Forum
    So I am going to be buying an AR in the next few months, probably as a Christmas present to myself. I've looked at several, and I'm leaning towards the Colt SP6940. Planning on putting an Eotech 552 on it as well. I got out of the 82nd Airborne two years ago, and the SP 6940 with an Eotech...
  18. Military Weapons Forum
    I just ordered 2 lower recievers from Palmetto State Armory. I wasnt planning on buying an AR for a while, but at $50 each, i couldn't pass it up. http://palmettostatearmory.com/1560.php Im new to ARs and looking for some advice on what lower parts kit to get. I was thinking about this one...
  19. Military Weapons Forum
    Ok, I finally got my rifle built completely so here is the review. First, some pictures of the rifle, the parts I used to build it, and then a range report. It is, a Palmetto State Armory upper and lower. The upper is completely PSA built. They do all the cool tests and inspections to the...
  20. Military Weapons Forum
    Well, I've been trying to decide on what upper receiver to get for a new build I'm doing. I was planning on getting a BCM Midlength 16" upper. I can't see any advantage to going with Colt, DD or LMT over BCM. BCM seems to be as good as these other brands but at a lower cost. Other people's...
Top