Survivalist Forum banner

ar15

  1. What would be a good AR pistol / SBR upper to buy?

    Military Weapons Forum
    I built this ages ago when I first got into NFA guns. I used an old Stag bottom and Bushmaster SBR upper. Back then the handle was not detachable on the upper or my problem would be solved now. I want to get rid of the loop handle upper and put a pistol / SBR upper on it with flat top pic rail...
  2. Your AR will get you killed...are you a soldier wannabe?

    Military Weapons Forum
    ...I think I will take my chances with the AR. No plans to dump it.
  3. The US Army Replacing The 5.56 With A 6.8 Cartridge?

    Military Weapons Forum
    Has anyone heard about this, I think this has been discussed on this forums before but is the US Military serious this time? :D: https://www.armytimes.com/news/your-army/2018/10/05/the-armys-saw-and-m4-replacements-will-both-fire-this-more-accurate-and-deadly-round/...
  4. future AR

    Firearms General Discussion
    Shortly after the FL shootings, I finally got around to purchasing some guns. I had tax return to spend, so it was time to go to gun store. I always knew I needed to get a pistol first and for most. got semi-9mm. Then I was deciding between a rifle or shotgun. went with a nice pumper 20g. I...
  5. First Optic for New AR Build

    Military Weapons Forum
    This is my first time around, and I'm on a bit of a budget. Later on when I have more expertise, and know how to spend it ... I'll put more money in. For now ... mid-range, not-junk is fine. So, I'm building an AR carbine, for (hopefully never) defensive use under 200m. I am considering the...
  6. New AR biuld on the way

    Rifle Forum
    Products used for the “Ultimate AR” build Here is a list of all products being used so far for the build, as more is added I will update the list of links. The basis of the rifle: https://www.drgunsllc.com/product/ar-15-3d-billet-set The Barrel...
  7. Former ATF Employee Speaks Out About Rate Increasing Devices

    Firearms General Discussion
    Thought i would share this, it was a live chat done by Military Arms Channel about an hour or so ago. Former ATF Employee Speaks Out About Rate Increasing Devices https://gunowners.org/alert1102018.htm
  8. Franklin Armory Introduces Short Barrel �Firearm� With Standard AR Stock and ATF Appr

    Firearms General Discussion
    Franklin Armory Introduces Short Barrel ‘Firearm’ With Standard AR Stock and ATF Appr Franklin Armory Introduces Short Barrel ‘Firearm’ With Standard AR Stock and ATF Approval..... Has anyone seen this yet? Not sure how Franklin Armory is getting the ATF to approve this isn't an SBR...
  9. Trying to decide my best SHTF rifle.

    Firearms General Discussion
    As things stand right now I have a basic setup of non perishable foods and basic medical supplies for my wife and I should we need to survive in SHTF, I'm planning on bulking them up and maybe aiming for some better quality eventualy. But for right now I feel my next decision I need to make is...
  10. Lancer mags not as robust as I was led to believe

    Military Weapons Forum
    I recently purchased 5 Lancer mags from my favorite online retailer along with some 40 round pmags. I bought these based on some online reviews and videos that all gave glowing reviews. When I got them in and examined them I was shocked at how flimsy they feel. I was able to squeeze the sides...
  11. Colt LE6920 Question and General AR Thread

    Military Weapons Forum
    Hey all. So I've been considering getting an AR15 while the getting is still good. I'm not actually a big fan of the AR platform, but seeing as it's sort of the generic choice I figure I'll get one anyway. I've been considering the Colt LE6920 because it it's cheap enough and Colt is a name that...
  12. DPMS Oracle AR15???

    Rifle Forum
    hello, I am looking to buy my first AR, at first I wanted to build one, with a BCM upper, and LMT lower, but that got rather expensive. I recently learned about the DPMS Oracle and found one for less than $500. I would appreciate and input on this rifle. and also, being that this rifle doenst...
  13. How accurate should I be?

    Rifle Forum
    Recently purchased a M&P15, put a new rail, low pro gas block, and front and rear flip up MBUS sights on it. No glass yet. I wanted to get really good with irons first. My question is. How good? What's a reasonable level of accuracy? And are MBUS sights good enough? I'm zeroing it @ 50yards...
  14. AR upper recommendations?

    Firearms General Discussion
    Hey I am looking to custom build my first AR, I think I have decided on the LMT Defense 2000 for the lower, and I have no idea for a upper receiver. I'm trying to keep the whole gun under 1400, and te lower runs about 350$. I would really like atleast a 10in hamdguard or bigger, and if it costs...
  15. Buying a second rifle

    Military Weapons Forum
    Hey all. I am looking to expand my gun collection further and could use friendly advise. I already own a 7.62x39 ak style rifle. Currently i am looking at getting another Rifle either for a backup or for my wife to use in case of SHTF. would it be smarter in your opinion to double down and get...
  16. Seems Eotech misled customers

    Military Weapons Forum
    Seems eotech knew about defects as far back as 2006 and failed to disclose this information. Now there is a class action lawsuit. http://legalnewsline.com/stories/510652369-eotech-sued-over-alleged-defects-in-combat-optical-sights Kinda ****es me off a company would put soldiers lives at...
  17. Machined 2 Piece Aluminum M4 AR-15 Carbine Drop-In Accessory Mount - $17.95 shipped

    Vendor Deals
    Machined 2 Piece Aluminum M4 AR-15 AR15 Rifle Carbine Drop-In Accessory Mount 6.7" Length - $17.95 shipped
  18. Popular AR15 Rifles Under $500

    Vendor Deals
    Popular AR15 Rifles Under $500
  19. Video: Store Owner Defends self and store with AR-15 rifle against 3 armed robbers

    General Discussion
    I don't see a thread for this, but I think it deserves one. https://www.youtube.com/watch?v=bUUKDv85DSY :cool:
  20. Is this a good deal? (G.i magazines)

    Firearms General Discussion
    does anyone think that $4.50 is a good deal on standard metal ar15 magazines?
Top