Storage container build - Page 17 - Survivalist Forum
Survivalist Forum

Advertise Here

Go Back   Survivalist Forum > >
Articles Classifieds Donations Gallery Groups Links Store Survival Files


Notices

Advertise Here
Similar Threads
Thread Thread Starter Forum Replies Last Post
My thoughts on INCH kits Jerry D Young Disaster Preparedness General Discussion 99 08-11-2019 09:58 AM
Prepping in a big city apartment - Priorities? 82Blazer Urban Survival 72 04-22-2018 09:14 PM
Food storage fats, oils, and essential fatty acids NY Min Food and water 53 12-30-2017 01:15 PM
Wise to rethink your food supplies doing heavy labor. bunkerbuster Food and water 56 10-02-2017 05:29 PM
Storage container advice bounty Australia and New Zealand 6 03-24-2017 10:58 PM

Reply
 
Thread Tools Display Modes
Old 06-17-2019, 10:20 PM
EventHorizon's Avatar
EventHorizon EventHorizon is offline
Cynical Thinker
 
Join Date: Jun 2013
Posts: 690
Thanks: 1,572
Thanked 4,312 Times in 529 Posts
Default



Advertise Here

What you're calling a barn is starting to look like a rugged built master crafted mini mansion. With all the archetitecture design, welding, carpentry, masonry and electrician work are; a master of all trades.... and there's the plumbing. I have no doubt you have it all figured out or will. Your plan, your schedule, and your budget. A thumbs up and best wishes. Please keep sharing.
Quick reply to this message
The Following 3 Users Say Thank You to EventHorizon For This Useful Post:
Old 06-18-2019, 02:45 PM
fordtrucksforever fordtrucksforever is offline
Target Shooter
 
Join Date: Dec 2012
Location: USofA
Posts: 532
Thanks: 217
Thanked 884 Times in 358 Posts
Default

Quote:
Originally Posted by EventHorizon View Post
What you're calling a barn is starting to look like a rugged built master crafted mini mansion. With all the architecture design, welding, carpentry, masonry and electrician work are; a master of all trades.... and there's the plumbing. I have no doubt you have it all figured out or will. Your plan, your schedule, and your budget. A thumbs up and best wishes. Please keep sharing.
Wow! Thanks for the compliments and encouragement. Extremely motivating and inspiring. I had to include the quote just so it gets posted again.

BTW thats Jack of all trades, master of none...But plumbing is a non issue. Just labor intensive. Very minor in the overall scheme of things.
Quick reply to this message
The Following User Says Thank You to fordtrucksforever For This Useful Post:
Old 06-21-2019, 12:03 AM
fordtrucksforever fordtrucksforever is offline
Target Shooter
 
Join Date: Dec 2012
Location: USofA
Posts: 532
Thanks: 217
Thanked 884 Times in 358 Posts
Default

After watching paint dry, err glue, I finally finished the first corner cabinet. Extremely happy with the results. If building cabinets for a living, I would find a different profession. For me personally, I dont have a problem with small imperfections. You redo it or live with it and just move on. It would be difficult to not redo until I was happy, if for a customer. Not that the minor issues would ever be noticed, but they would be known by me.

After getting this corner box built, it needed the oak face. Then had to figure out what to do for a door, using existing donor pieces.



Using demo'ed scraps has its downsides. I had to clean up a lot of these planks to make them usable. Also so they will take paint. The insides will go back white. I chose to go with one single height shelf instead of staggering them like in previous post.



You can see how simple the cabinets actually are. This front is all that will be seen on most of them. So the front gets the finish materials. Here you can see the two stiles(vertical pieces on cabinet ends) and the first rail(horizontal strip) that is partially stained from donor cabinet.



The face is done. Now ready for sanding, stain, then final clear coat finish.



This is what I was hoping would work out. It took most of the time getting saw to cut a true 45 degrees so both doors would fit together. Next thing I had to do was add that thin strip to get wide enough so the opening was covered. When it is stained to match no one would know the door wasnt made this way originally.



I was so glad all the effort I put into making this door actually worked as had planned(lots of hope). Everything fits flat and square.




You can see where the hinges used to be when only a single flat door. With the corner door like this, gives more access to inside of cabinet. Otherwise with a divider and two narrow doors, limits how useful and convenient the storage area would be.

Time for the next cabinet to get built.
Attached Thumbnails
Click image for larger version

Name:	DSC04346.jpg
Views:	282
Size:	50.7 KB
ID:	288382   Click image for larger version

Name:	DSC04347.jpg
Views:	279
Size:	47.6 KB
ID:	288384   Click image for larger version

Name:	DSC04349.jpg
Views:	279
Size:	53.5 KB
ID:	288386   Click image for larger version

Name:	DSC04350.jpg
Views:	268
Size:	60.0 KB
ID:	288388   Click image for larger version

Name:	DSC04351.jpg
Views:	276
Size:	66.0 KB
ID:	288390   Click image for larger version

Name:	DSC04348.jpg
Views:	278
Size:	77.7 KB
ID:	288392  

Quick reply to this message
The Following 2 Users Say Thank You to fordtrucksforever For This Useful Post:
Old 06-22-2019, 04:18 PM
fordtrucksforever fordtrucksforever is offline
Target Shooter
 
Join Date: Dec 2012
Location: USofA
Posts: 532
Thanks: 217
Thanked 884 Times in 358 Posts
Default

This next cabinet box was a simple 2 ft square that fills in between the range top and corner cabinet. It went fairly quickly. So last nights efforts ended with a nice addition to the kitchen project.



Most of the face was donor pieces removed from old cabinets and cut down to size. So you can see a lot of the existing finish shows. If I decide to go with a lighter stain for cabinet to contrast against the darker doors, will have to figure out how to remove the old stain in several places on the cabinets.

This finishes one wall for the lower cabinets. Now I can take these with the new appliances down to cabin and get them ready to install.
Attached Thumbnails
Click image for larger version

Name:	DSC04353.jpg
Views:	273
Size:	59.6 KB
ID:	288448  
Quick reply to this message
The Following 2 Users Say Thank You to fordtrucksforever For This Useful Post:
Old 06-27-2019, 08:51 PM
fordtrucksforever fordtrucksforever is offline
Target Shooter
 
Join Date: Dec 2012
Location: USofA
Posts: 532
Thanks: 217
Thanked 884 Times in 358 Posts
Default

Trying to stay ahead of things as the cabin comes together. Since some of the kitchen cabinets are ready to be test fit before installing, got me to thinking. I was fortunate to acquire a dumpster load of scrap granite, marble and quartz, so that is what my counter tops will be. No ifs ands or buts. Either one, or made from all three choices. I was taking a quick inventory of what there is the most of. Seems like my main choice of materials right now will be quartz. So quartz is what it will be..for now.



This is what a lot from the last load looks like. Simple and clean.



What I want to try is cut the larger pieces to fit like a picture surrounded with a frame. Maybe use some long narrow pieces of granite for the picture frame. Actually can just use it for the outer edge. Since the back splash will cover up the other edge. So it can just be cut to roughly fit and covered over. Nothing particular about the granite type color or pattern, just used to border these quartz pieces. Everything will be fit and epoxied together with no grout lines. Just clean cut sections butted together. The bonding resin or epoxy can be easily color matched and not noticeable when finished.



There are a few pieces of granite like this one that could be used as contrast next to those white quartz sections.



This piece might work like next to the sink or where a chopping block would be used. Just as examples. When I get closer to cutting these pieces, will try laying them out and see what works. Mainly whatever gets the most coverage is the favorable way, unless something just looks really good if I try to be creative. But that isnt very likely for me.

Just got loaned a granite saw and router. With be test driving these to see if I can make them scraps in pics up there into a kitchen countertop. Wish me luck.
Attached Thumbnails
Click image for larger version

Name:	DSC04356.jpg
Views:	224
Size:	34.1 KB
ID:	288608   Click image for larger version

Name:	DSC04357.jpg
Views:	218
Size:	53.4 KB
ID:	288610   Click image for larger version

Name:	DSC04358.jpg
Views:	216
Size:	32.5 KB
ID:	288612   Click image for larger version

Name:	DSC04359.jpg
Views:	244
Size:	86.0 KB
ID:	288614  
Quick reply to this message
The Following 2 Users Say Thank You to fordtrucksforever For This Useful Post:
Old 07-04-2019, 10:22 PM
fordtrucksforever fordtrucksforever is offline
Target Shooter
 
Join Date: Dec 2012
Location: USofA
Posts: 532
Thanks: 217
Thanked 884 Times in 358 Posts
Default

Got out for a short work day. It was a good day. My main reason for the trip was to deliver those kitchen cabinets and make sure they would fit like I was hoping. Aside from laborious and tedious work it took to load them in the truck and then having to unload, that effort was worth it.





Definitely not looking as much like a storage container from this view.

Cabinets still need to get sanded and stained so they all match. The fit is so much better that had been expected. It wont take too much to get them lined up and secured in place. Very little trimming to get it all done. This is only half of the lower cabinets that are going to be made. Since everything looks like it will work, I can focus on getting the rest of them built as time allows.

The next thing I had been putting off for a while is laying down plywood subfloor in the larger 12 x 20 added on room. The 14 gauge sheetmetal was fairly solid, but still sounded like a tag-team match taking place on Saturday Night Wrestling. Way too much bong bong walking across the floor

I ran across some roofing membrane. It is like tar paper, but more rubbery. One side is sticky to lay down on roof. The exposed side has fine granules for a non skid surface. This stuff usually lays down the same as tar paper. But the overlapped joints are sealed and become waterproof.



I rolled this out then peeling off the plastic layer, stuck down to steel floor. It seems like is going to work out great. A water, bug, vapor, barrier and seals out any air creeping in from underneath. Also works out well for sound deadening.



Next was to lay down some second hand 3/4" decking for my subfloor. These two sheets were the first that went down. I also got the last piece of sheetrock up on the right side of wall.



I picked up a box of #14 x 1-1/4 self drilling screws to secure plywood. Screws have to drill thru two layers of steel before drawing down tight. I was concerned that smaller diameter ones would either snap off or not able to drill thru. These screws did the job. I bought them cheap surplus for about a penny per screw.

After this decking was screwed down, the floor went from slightly noisy to extremely solid and no more bong bong. It is now just like a pier and beam house, except even more solid. Sandwiching the sheetmetal between plywood and structural beams underneath made it very solid. Originally I was unsure if this would be rigid enough. My other option was add a second layer of decking to get the solid feel I would then expect. Didnt want to go that route just from the extra expense for 10 more sheets of plywood.

Hope every patriotic American enjoys their Fourth of July. Even if it is just sitting on the front porch, just a swingin... watching the local fireworks.
Attached Thumbnails
Click image for larger version

Name:	DSC04370.jpg
Views:	188
Size:	55.3 KB
ID:	289090   Click image for larger version

Name:	DSC04372.jpg
Views:	182
Size:	52.3 KB
ID:	289092   Click image for larger version

Name:	DSC04363.jpg
Views:	179
Size:	46.3 KB
ID:	289094   Click image for larger version

Name:	DSC04367.jpg
Views:	188
Size:	63.7 KB
ID:	289096   Click image for larger version

Name:	DSC04368.jpg
Views:	184
Size:	47.8 KB
ID:	289098  
Quick reply to this message
The Following 4 Users Say Thank You to fordtrucksforever For This Useful Post:
Old 07-15-2019, 02:21 AM
fordtrucksforever fordtrucksforever is offline
Target Shooter
 
Join Date: Dec 2012
Location: USofA
Posts: 532
Thanks: 217
Thanked 884 Times in 358 Posts
Default

I thought it was time to get another one of the cabinets built. This one is just like the other corner cabinet, except it holds a sink. I will change how the top is supported just a little so the sink will drop down in place.



This is new used lumber. Can you actually have that? Was used for a temporary repair then discarded. I ran the lengths of these thru the table saw to make sure they were all the same thickness, so would sit flat. This time I removed the back corner of frame, as seen here. It is cut across at a 45 degree angle. I actually cut the pieces to a 22.5 degree angle on each end to make a perfect fit. My wood working skills are improving....



Some of you may think this would be a total waste of your time. Just go buy a new piece of plywood, dumoss. Too much effort to scrape off the old laminate. I spent about an hour removing it from a 4x8 sheet of 3/4 plywood. It was a pita, but dont see any reason to throw away $60 for what I already have.



With just a little 3/4" wood chisel, and hammer I peeled and broke off all of this laminate. This stuff is jagged and sharp when broken. There are plenty of cuts on my fingers as a good argument against doing it. This one side has a layer of glue all over. But will be hidden when cabinets are installed. It will be on the blind sides of corner cabinet. When installed, you would never know there is dead dry glue all over it.



This is a mess I will have to clean up. The cost of using what free materials there is to build cabinets from. The other side of plywood is smooth with a nice grain pattern. It is A/B cabinet grade with one side finish sanded. Not really important using it as sides of a blind cabinet.



The base is now covered using another piece of that plywood that is still covered with laminate on one side. No reason to remove it since facing down. It measured about 13 inches wide, so I cut three pieces to do the full cover here.



I finally got wise and picked up this used worm drive circular saw. It puts the chinese clone of a regular saw to shame. No more binding or angled cuts on harder and denser wood. This is one tool I should have bought more than a few years ago. Lesson learned. Good tools give good results. Better tools give better results. Bad tools.......you get the idea.



The first cut made with the saw is all I needed to see to know it was definitely the right decision to buy. Cabinet plywood is very dense and hard to cut thru with the other saw. This worm drive went right thru like it was a soft piece of pine. No bind, veering off or especially cutting at an angle, because the base flexes so bad on that cheap saw.



The sides are glued and screwed(nailed), then clamped square. Watching glue dry is really boring. So decided to post this here while waiting. Besides my arms are sore and calling it good for the night.



From the back this is the inside of corner cabinet. Everything fits so much better when the cuts are straight and square. Not to mention actually measuring exactly to size. This will be the best fitting cabinet so far. I cant wait to see how it turns out in a few days when finished. It will also look more like a newly built unfinished cabinet since most of the wood has not been previously stained or painted.

Much as I dont like building cabinets, and would never do this type of work for a living, it is still enjoyable and rewarding to see the results of my labor, especially when put to use.

Initial cost to build this one cabinet is expensive, comparatively, since the others were basically nothing. I spent $73 on the worm drive Skil saw. It came with two carbide blades. I used the 40 tooth finish blade to cut that plywood. Since this saw works so much better, it will save time, and materials. No more scrap pieces from bad cuts. The cost will average out to be very negligible by the time I get finished with everything that relies on this saw.
Attached Thumbnails
Click image for larger version

Name:	DSC04373.jpg
Views:	135
Size:	80.1 KB
ID:	289382   Click image for larger version

Name:	DSC04374.jpg
Views:	139
Size:	39.1 KB
ID:	289384   Click image for larger version

Name:	DSC04375.jpg
Views:	149
Size:	42.9 KB
ID:	289386   Click image for larger version

Name:	DSC04376.jpg
Views:	148
Size:	66.9 KB
ID:	289388   Click image for larger version

Name:	DSC04378.jpg
Views:	138
Size:	57.4 KB
ID:	289390   Click image for larger version

Name:	DSC04380.jpg
Views:	151
Size:	71.3 KB
ID:	289392  

Click image for larger version

Name:	DSC04379.jpg
Views:	145
Size:	50.6 KB
ID:	289394   Click image for larger version

Name:	DSC04381.jpg
Views:	149
Size:	55.5 KB
ID:	289396   Click image for larger version

Name:	DSC04383.jpg
Views:	143
Size:	57.6 KB
ID:	289398   Click image for larger version

Name:	DSC04385.jpg
Views:	152
Size:	63.0 KB
ID:	289400  
Quick reply to this message
The Following User Says Thank You to fordtrucksforever For This Useful Post:
Old 07-20-2019, 06:21 PM
fordtrucksforever fordtrucksforever is offline
Target Shooter
 
Join Date: Dec 2012
Location: USofA
Posts: 532
Thanks: 217
Thanked 884 Times in 358 Posts
Default

A little farther along on this other corner cabinet. It will hold the sink, so was made a little different than the other cabinet previously built.



This is 1/4" oak paneling that was demo'ed from that house being remodeled. These are just pieces glued and nailed up with trim to look expensive. The material is almost useless, unless you happen to be building some kitchen cabinets from surplus and someone elses trash.....



The backs of upper cabinets and some of the lower ones have 1/4" paneling on wall side to close it in. Also good for added strength, if needed. I needed a little more strength for support on this one cabinet. After removing nails, scraping off Liquid Nails on the back side, mark where to cut, then end up having something that can be used here. This paneling gets lightly sanded so will hold paint when finished. It is only visible on the inside when doors are open, so not really an issue.



Looking thru the door opening one side is done here. Notice any difference after that light sanding?



Here is the back side that goes against wall. You see this opening that has been cut back and will have access to plumbing coming up thru floor in corner of container where cabinet sits.



From the top this cabinet does not have the cross bracing, which isnt really necessary. Just another way to build with some added strength.



Here is how the sink will fit. Now I just have to figure an easy way to cut that granite for an opening needed to drop sink down in...This sink is another retired and disposed of item. There are nicer neater and cooler ones out there, but considering the price, I like this one.

Time to make another one of those doors to cover front of the new cabinet. Hopefully this door will be a little easier to make than the last one.
Attached Thumbnails
Click image for larger version

Name:	DSC04386.jpg
Views:	122
Size:	66.6 KB
ID:	289542   Click image for larger version

Name:	DSC04388.jpg
Views:	125
Size:	56.5 KB
ID:	289544   Click image for larger version

Name:	DSC04390.jpg
Views:	124
Size:	61.0 KB
ID:	289546   Click image for larger version

Name:	DSC04392.jpg
Views:	119
Size:	62.1 KB
ID:	289548   Click image for larger version

Name:	DSC04391.jpg
Views:	126
Size:	55.0 KB
ID:	289550   Click image for larger version

Name:	DSC04283.jpg
Views:	130
Size:	57.2 KB
ID:	289552  

Quick reply to this message
The Following 3 Users Say Thank You to fordtrucksforever For This Useful Post:
Old 08-13-2019, 03:06 PM
fordtrucksforever fordtrucksforever is offline
Target Shooter
 
Join Date: Dec 2012
Location: USofA
Posts: 532
Thanks: 217
Thanked 884 Times in 358 Posts
Default

Been a few weeks since I had the chance to work on my cabin. It is too far along to not finish or possibly loose interest. But is irritating when I cant get any work done. Some days I am sitting around waiting to load up and actually go work for income. But unable to bail for a few days in between and do anything on my cabin.

Last week I was doing my lowly data cable work at a store remodel. Most of these remodels require foundation to be trenched for electrical, plumbing and refrigeration. They cover the trench in 3/4 plywood temporarily. Some dumbass had purchased A/B cabinet grade plywood instead of the usual C/D common for decking/subflooring and general use.

I had mentioned how nice the plywood looked with such a nice finish. The foreman explained what had happened. Then asked if I had any use for them when they were done. The trenches had to be covered for one day then later would get filled with concrete. Two sheets were cut lengthwise and the others were left full size.

Naturally I said all of it could be put to use immediately. He said it was all going in the dumpster after that night. He would put them aside if I wanted to pick up the next day. Obviously I did not hesitate one second to take him up on the offer and pick these up.



There are two of these full size, 4x8 sheets. Then two more sheets cut lengthewise in half. That just happens to work out perfectly. I need the width for cabinets to be 23 1/4 inches. So just under 3/4 inch needs to be shaved off and I can finish building all of the lower cabinets with no waste of materials for kitchen. One full sheet will supply ends for three lower cabinets. There is enough salvagable lumber from those old cabinets that were torn out from a house to have everything I need to completely build these.

The upper cabinet sides will only be 11 inches wide. So plenty of materials for these too.

Moving on to other things related to my cabin. Last winter I resurrected a really clean looking Generac 5500 generator to have for any higher load power tools as needed.



I was really disappointed in how this unit performed when giving it a test run. Under any heavy loads, well within its capacity, was not very impressive. Actually very depressing. There was one thing I thought may be the problem.

The original issues of this generator was it not having any compression because the vales were carboned up so bad would not close. Really not hard buildup but just dry soot from running way too rich. I did a really nice valve job and it started right up and ran like was expected. Until I loaded it down. Then motor would labor really bad and stumble, not able to maintain the rpm to sustain a heavy load.

After looking over everything I had concluded(hypothesized) the problem was actually caused from choke valve. It was vibrating so much and fluttering under any load. With very little movement of the choke plate would really alter how the motor ran. The choke plate vibrating like it was seemed to be causing an overly rich condition. No black smoke, but too rich to run well.

Someone had previously worked on the carb and put choke plate in backwards. Also broke the shaft that retains that plate. Also referred to as the butterfly or shutter valve. I had fixed it, but still missing the spring detent that keeps the butterfly locked rigid when open.

It was cheaper to replace the whole carb than try to locate the broken and missing parts. So I finally bit the bullet and forked over $13.50.



For the amazing low low price of $13.50 which included shipping from china, I was the recipient all of these new parts. So doing nothing more but replace the old carb, this generator fired right up on second pull. No different than before. Well one main difference. When I loaded it down with a large circular saw and 4 1/2 angle grinder at the same time, motor did not labor at all.

Now I am not so dead set against everything that isnt Honda when related to small generators. The other off brand chinese models I have are still not very impressive considering what they claim as rated for. But this Generac has given me some hope.

My plans are still focused on selling all of the other chinese models I had repaired last year. Then use some of the money to replace that over priced module for one of the not running Honda EB3000c cycloconvertor generators that are just collecting dust.

For now I will keep using the small dinosaur Honda E1500 to run lights and A/C. Then fire up this Generac when using any heavy load power tools as needed. When the EB3000c is running, it will replace both of these other gens. More efficient on fuel consumption and a lot quieter. Looking forward to that for sure.

Sorry for not having much to report on. I am just about finished with all of the stores for this year. A few more weeks and should be completely done with them. There were 8 remodels for the year. They usually get strung out and way behind schedule. Always the hurry up and wait scenario that I really hate. The weekly schedule changes so much there is really no reason to even have one. Sure isnt reliable.

I shouldnt complain. It pays very well and the work isnt difficult for me to do. Being able to repurpose some of the demo'ed materials, and dig thru the dumpster occasionally really keeps me looking forward to the next job. Well up to a point anyway.

Thanks again for following this thread. It is inspiring and keeps me motivated to keep posting with updates as to the progress so far.
Attached Thumbnails
Click image for larger version

Name:	DSC04396.jpg
Views:	72
Size:	48.9 KB
ID:	290556   Click image for larger version

Name:	DSC04019.jpg
Views:	71
Size:	85.8 KB
ID:	290558   Click image for larger version

Name:	DSC04394.jpg
Views:	74
Size:	59.2 KB
ID:	290560  
Quick reply to this message
The Following User Says Thank You to fordtrucksforever For This Useful Post:
Old 08-13-2019, 05:35 PM
tedlovesjeeps71's Avatar
tedlovesjeeps71 tedlovesjeeps71 is offline
Survivor
 
Join Date: Feb 2015
Posts: 14,145
Thanks: 9,755
Thanked 37,010 Times in 11,126 Posts
Default

That's a great score on the plywood (jealous) and cool that the Genny is better.
Have you mentioned what you are going to use for counter Tops??
Quick reply to this message
Old 08-14-2019, 02:07 AM
fordtrucksforever fordtrucksforever is offline
Target Shooter
 
Join Date: Dec 2012
Location: USofA
Posts: 532
Thanks: 217
Thanked 884 Times in 358 Posts
Default

Quote:
Originally Posted by tedlovesjeeps71 View Post
That's a great score on the plywood (jealous) and cool that the Genny is better.
Have you mentioned what you are going to use for counter Tops??
HERE

HERE
Quick reply to this message
The Following User Says Thank You to fordtrucksforever For This Useful Post:
Old 08-14-2019, 04:01 PM
Mr4btTahoe Mr4btTahoe is offline
Hiker
 
Join Date: Jan 2016
Location: Southern Indiana
Posts: 730
Thanks: 440
Thanked 1,219 Times in 422 Posts
Default

As far as generators go... I absolutely love our harbor freight Predator 3500 inverter generator. Gave ~$640 on sale.. it's insanely quiet (half as loud as my 2kw Onan).. sips fuel... electric start and fires on the first hit every time.

Found quite a few people with nearly 4k hours on them without a problem... one said his finally started using oil at 7k hours.

I've got 30 hours on mine (multiple oil changes to get all the crap left behind from Chinese manufacturing out of the case). Gonna switch it over to synthetic soon with a fresh NGK plug. Looking forward to many years out of it.

With all that said... Chinese carbs are hit/miss. Have bought multiple good ones but have been hit with a few bad ones out of the box too. If it works great for a few weeks.. it's likely good to go.
Quick reply to this message
The Following User Says Thank You to Mr4btTahoe For This Useful Post:
Old 08-15-2019, 10:11 AM
fordtrucksforever fordtrucksforever is offline
Target Shooter
 
Join Date: Dec 2012
Location: USofA
Posts: 532
Thanks: 217
Thanked 884 Times in 358 Posts
Default

I am looking forward to ridding myself of the generic(not the Generac) chinese crap and will enjoy my first inverter type generator, that happens to be a Honda.

I would expect an inverter type to work much better. If you can get decent hours from a chinese one, thats a bonus.

I was given two extremely high mileage and used hard EB3000c Honda inverter generators. They both suffer from the module failing. Everything else checks out just fine. Unfortunately the replacement modules are $300. One is an early model and the other is much much newer. But the newer one is still nearly 20 years old. I expect to get a lot more years out of it once running again.

After my cabin has been officially connected to the grid, the remaining gens will be retired. Then have 100LL AV gas run thru carb, then drained and stored, ready for emergency use or any need for portable power in the future.
Quick reply to this message
The Following User Says Thank You to fordtrucksforever For This Useful Post:
Reply

Bookmarks



Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Survivalist Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Gender
Insurance
Please select your insurance company (Optional)

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:24 AM.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright © Kevin Felts 2006 - 2015,
Green theme by http://www.themesbydesign.net