|Military Weapons Forum AR15, AK47, SKS, H&K, Galil, CETME, FN/FAL, Tanks, Ships, Jets, Helicopters....|
||Thread Tools||Display Modes|
I want a double barrel shotgun with fully rifled barrels. A "Poors Mans Dangerous Game Rifle". Then I can live out my Safari fantasies.
|The Following User Says Thank You to Jungleboy For This Useful Post:|
just need 20k.
Since you opened up the parameters, I decided to post the whole custom list. I posted some of these earlier, but I've consolidated the list and am too lazy to strip out the older stuff.
Compiled custom equipment ideas list:
Quality first and foremost. Suitability to the task, multi-purpose if possible, finally light weight.
Custom Main Battle Rifle (7.62x51 MBR): adjustable gas piston select fire action with non-reciprocating ambidextrous charging handle, auto hold open on empty magazine. Ambidextrous bolt release. Ambidextrous safety. Forward assist. M-14 stripper clip guide and M-14 sights. 22” barrel with the tri-compensator of the BM-59/62 with bayonet lug to take a custom 12” OKC-3S style bayonet. A full length barrel-in-line polymer stock with pistol grip and integrated picatinny rails that don’t interfere with the stripper clip feed. Accept a bipod. Use M-14 free fall magazines with bolt hold open followers, and have an ambidextrous magazine release.
Custom ‘Scout’ Rifle: .350 Remington Magnum lever action rifle based on the combined features of the Savage 99, Browning BLR, & Johnson 1941 rifle, w/Integrally suppressed 20" barrel, off-set stripper clip loading 10-round rotary magazine with cutoff, ghost ring peep sights, Leupold Mark 4 1-3x14 CQ-T QD scope on receiver on see-through mount w/ATN PS40-4 Night Vision front scope system, three point sling on push-button swivels, polymer Mannlicher fore stock w/attachment for custom 12" OKC-3S bayonet, polymer in-line butt stock w/internal recoil reducer and recoil reducing butt pad, 24-round tip out butt stock shell carrier w/20-rounds + 4 .380 ACP adapters
Custom leather LBE system: 2½” lined leather gun belt with leather H-suspenders and QD backpack. Pouches for .350 Magnum stripper clips, holster for .50GI pistol, quad pistol magazine case, knife sheath, saber hanger, survival kit pouch, Bottle pouch
Backup Rifle: Same as above except in .308 w/.32 ACP adapters for small game.
Hi-cap handguns: .50 GI weapons similar to the Para-Ordnance P-14/P-12/P-10 series w/9/8/7 round standard magazines and 20-round & 30-round extended magazines. Extra barrel, slide, and magazines for .45ACP for each. One for carry and one spare. Plenty of magazines.
Custom .50GI ammunition in addition to FMJ: shot shell, red flare, white flare, green flare
Four custom Bond Derringer frames with .50GI & .45 ACP barrels
Other weapons: A pair of inexpensive 3-barrel 12 gauge shotgun with a Whippet version based on Armsport 2900 Trilling three-barrel 12-gauge shotguns cut down to whippets. Sets of 20-ga, .45 Colt, .44 Magnum, .357 Magnum, 9mmP, & .22RF adapters. Similar pair in 20 gauge and
A new shotgun shell: 20mm bore, 1½” long rimless brass case, with slight crimp over top wad
Custom Dual purpose Shotgun for 20mm 1½” shotgun shells: adjustable gas operating system, switchable side eject, box magazines (2-round for migratory birds, 4-round for other hunting, 10-round for defense), (20-round and 30-round drum magazines for defense), easy switch barrels (18.1”, 24”, 26”) with ventilated Poly-Chokes, switchable pistol grip/straight line grip, folding stock with internal recoil reducer and recoil reducing butt pad
Custom hunting gun (fancy): Peter Hofer funfling. 12-ga x 12-ga w/.375 H&H Mag over .30-’06 over .22 Hornet. Carved fancy wood stock, engraved and inlaid metalwork. 20-ga chamber adapters for the 12-ga barrels. Swarovski Z6 2.5-15x56 scope on see through mounts. Peep sights. Custom carved leather sling w/flush QD swivels. Custom leather money belt w/12 gauge ammunition slide, .375 H&H Magnum/.30-‘06/.22 Hornet ammunition slide.
Custom hunting gun: An inexpensive (relatively speaking) version of a Peter Hofer funfling. 12-ga x 12-ga w/.375 H&H Mag over .30-’06 over .22 Hornet. Carved fancy wood stock, engraved and inlaid metalwork. 20-ga chamber adapters for the 12-ga barrels. Swarovski Z6 2.5-15x56 scope on see through mounts. Peep sights. Custom carved leather sling w/flush QD swivels. Custom leather money belt w/12 gauge ammunition slide, .375 H&H Magnum/.30-‘06/.22 Hornet ammunition slide.
Main blades: Pair of custom Damascus steel Mediterranean bowie knives w/12” blades and black walnut scales.
A custom Damascus steel Batangas knife, Mediterranean bowie style, w/8" exposed blade and 12" blade exposed when the scales are folded back. Think butterfly knife on steroids.
Custom Quad pouch, molle attachment, silent clasp closures (snap would be okay but no velcro) set up for a Leatherman Surge Multi-tool, Wenger Survivor (or Victorinox Workchamp) SAK, Surefire G2 flashlight (or Mini-Maglight w/Terra-Lux TLE-5EX & Terr-Lux or IQ Switch), and a fourth pouch for an allweatherfirestarters.com Navigator II with 4 Wetfire cubes and several sticks of fatwood. Could be side by side or two wide by two deep. Could do a 5 pouch version with vertical pouches for the first 4 items with the Wetfire and fat wood sticks in a horizontal pouch below the 4 vertical pouches. Might also add another pouch to carry a large hank of 550 cord. In addition might add another pouch to the system to carry a Survival Straw Brand straw purifier, or Life Straw w/Katadyn Micropur tablets, or a Steripen Adventurer OPTI water purifier w/Steripen prefilter & several sets of extra batteries, or an MSR MIOX purifier w/test strips & salt. Could be another pouch with the purifier, accessories, wide mouth stainless steel water bottle and folding handle cup.
Custom Swiss Army Knives:
Small game, fish, & fowl SAK w/trailing point skinning blade, blunt tip slitting blade, fish scaling blade (w/hook extractor & line guide), gut hook/spoon, split shot tool, spey point jointing blade, clip point utility blade. Cartridge extractor hook, pushpin push pin, choke tube wrench
Survivor SAK w/clip point blade, whistle, replaceable magnesium bar & ferro rod, magnesium scraper/ferro rod striker (removable), wood saw, button compass, file, carbide knife sharpener w/replaceable edges. handle socket for fire drill.
Camp SAK w/scissors, can opener (w/large screwdriver), bottle opener (w/small screw driver), twist key can opener (w/Phillips screw driver), classic beer can opener, corkscrew (w/fine screw driver), toothpick, tweezers, clip point blade, serrated blade, magnifying lens, tent stake puller
Weapons support SAK w/push pin push pin, choke tube wrench, set of allen wrenches, set of gun turn screws, cartridge extractor,
Bushcraft multi-tool (all tools lock, 4 main blades open without opening tool)
Combo pliers w/replaceable cutting bars, wood saw w/set teeth, metal saw w/set teeth, wood rasp one side/metal file other, clip point blade, serrated sheep’s foot blade, large scissors, V-wrench, hex bit holder, awl w/sharp edge & sewing eye, metal punch, fire steel striker, utility hook for pulling tent stakes and other uses, handle socket for fire drill
Custom BOB multi-tool
Large clip point locking blade
Medium serrated sheep’s foot locking blade
medium needle nose pliers w/medium wirecutters & wire terminal crimp notch
can opener w/large screwdriver
bottle opener w/medium screwdriver (flat)
can twist key opener w/medium Phillips screwdriver
cork screw w/fine screwdriver (flat)
t-handle puller hook (tent pegs, tent pole pins, etc)
medium leather/metal punch point/scribe point w/thread slot
medium pivot-bar type wrench: http://www.myark.com/ (caution - loud after a few seconds)
fine pivot-bar type wrench
wire stripper notched blade
screw starter spiral point
tinder pocket w/wet fire tinder
knife sharpener/fire steel striker http://www.benchmade.com/products/983902X
A purpose built SAK and multi-tool combo with purpose built sheaths containing additional items specifically for camping/hunting.
Bushcraft multi-tool (all tools lock, 4 main blades open without opening tool)
Combo pliers w/replaceable cutting bars
Wood saw w/set teeth
Metal saw w/set teeth
Wood rasp one side/metal file other
Clip point blade
Serrated sheepsfoot blade
Hex bit holder
Awl w/sharp edge & sewing eye
Utility hook for pulling tent stakes and other uses
Handle socket for fire drill
Multipurpose sheath w/leather shoe lace for fire bow drill
Crank LED flashlight using 2 replaceable rechargeable Lithium AA Batteries
A wind up, capacitor type LED headlamp.
A new, enhanced Night Watch type tripwire perimeter alarm, or purpose built outdoor perimeter alarm using modern technology with wind up energy source.
A multipurpose vented type umbrella walking stick that can be converted to collect rain water and be used as a weapon and small shelter.
A stool that is lighter and smaller than the current alternatives. Just a stool, not a full blown chair. Similar in concept to the triangular leather ones with pockets in the corners that three legs, connected in the center, were inserted into. Modern, lightweight materials, especially if it could have other purposes as well, would be nice.
Custom hand cart: Cabela’s Super Magnum style game cart style. Dual no-flat 26” wheels. Foldable. Custom Hardigg waterproof containers. Pulk and inflatable raft carried on top. Floats even when overloaded. External tie points for piling on additional gear. Brackets for long handled shovel and a double-bit axe. Vertical posts for to run support cord for awning, etc. Quick release/break-away waist band hitch with automatic brake. Kick stands. Bicycle hitch, side hangers for Hardigg gun cases.
Custom Montague Paratrooper type folding heavy duty bicycle w/spring/hydraulic suspension, hydraulic disk brakes, puncture resistant tires, dual dynamos to charge batteries for lights and charging GPS, etc, seat post trailer hitch, rear axle QD trailer hitch.
Custom in-line bicycle trailer w/QD rear axle hitch, spring/hydraulic suspension, 175 pound capacity, lights, brakes, cargo cover, kick stands.
Custom side-by-side wheel bicycle trailer w/QD seat post hitch, spring/hydraulic suspension, 350 pound capacity, lights, brakes, cargo cover
Custom ROKON Trailbreaker w/Hatz 1B40 diesel engine conversion, fuel/water wheels, saddle bags, rear platform, solid hitch, seat & front suspensions
Custom ROKON in-line trailer using a fuel/water wheel for the tire, equipped for bugging out and medium term camping in the field.
Custom ROKON sidecar and custom tandem axle trailer using the fuel/water wheels, equipped for bugging out and long term camping in the field. Off set hitch mount so the trailer will track with the bike and side car wheels.
Custom folding tent platform. Anodized aluminum frame w/bottom rails or footed stands, sectional marine plywood deck with insulation pad overlay. The platform doesn’t have to be all that thick if the frame is well designed and could be tent footprint specific, or of a few basic rectangular sizes. 18” lift, with tie-down points all around the edge. Would lift the tent above the snow, wet ground, brush, rocks, etc., and allow those with difficulty getting into and out of less than full height tents much easier.
Custom two-person Baker tent of double wall silnylon material w/tub floor, awning, no-see-um netting, & privacy wings. Self-supporting aluminum frame. Can use site cut poles if needed. Plenty of 550 cord and a variety of stakes for different ground conditions.
Custom one-person Whelen tent of silnylon material w/floor, no-see-um netting. Self-supporting aluminum frame. Can use site cut poles if needed. Plenty of 550 cord and a variety of stakes for different ground conditions.
Custom six component sleep system: All Quallofil insulation. Oversize semi-mummy configuration. Light liner inner bag, medium main bag, heavy outer bag, bivy bag, self-inflating sleep pad. 70F to -50F in various combinations. Includes Quallofil pillow.
Water treatment: Two customized 1,000,000 gallon water purifier systems based on Sawyer’s Point Zero Two micron absolute water purifier cartridges w/Silt-stopper pre-filters & Katadyn activated charcoal post filter. Hydration bag kit, bottle kit, n-line kit, & pump kit for each. Four spare purifier units & spare Silt-stopper filters and activated charcoal
Customized Yaesu FT-897D Amateur radio. Wide band modifications to include full RX/TX on CB, Business Band, Air Band, Marine VHF and HF bands, and the Public Service bands along with the Amateur bands. Custom case with 2 spare batteries and solar battery charger, Miracle Ducker TL antenna, 6-reel Yo-Yo antenna, ATAS-25 portable antenna, and custom multiband pedestrian antenna.
An improved Yo-Yo multi-band antenna of better construction.
Man-Pack conversion kits for various Amateur and Business band HF radios that provide battery, charger, top outlet antenna connection, and good folding HF whip antenna. Or a less expensive, purpose built Man-Pack Amateur MF/HF/LoVHF radio of good quality, but not necessarily Mil-spec, set up similar to the military man-pack radios.
Custom AM/SSB CB handheld radio with long rubber ducky antenna
Custom clothing: Twenty-four sets khaki color, military khaki style field clothing. Long sleeve shirts with two button down flap pockets, button down collar, 8-button placket, long tails, sleeve pencil pockets, inside double elbows, center back pleat, and epaulets. Long pants with button down rear flap pockets, two-slash front pockets, 2 watch pockets, 2” belt loops, blousing tapes on leg hems, inside double knees, and 8 suspender buttons.
Six sets lightweight cotton blend for hot weather.
Six sets medium weight cotton blend for warm weather.
Six sets in silk lined medium weight washable wool for cool weather.
Six sets in unlined heavy wool for use with silk long johns for cold weather.
Custom hooded poncho made from heavy sylnylon, snap up rear extension for pack, lots of grommets & snaps, Quallofill insulated hooded liner
Merino/alpaca/cashmere wool cardigan sweater w/leather epaulets, leather elbow patches, hand warmer pockets, 8-button placket, hood
Custom silk lined leather bomber jacket w/epaulets, two front cargo pockets w/side entry hand warmer pockets, two inside pockets, leather cuffs, leather waistband, twill and lamb’s wool removable liners & collars, and hood.
Custom silk lined leather bush jacket w/epaulets, two large front cargo pockets w/side entry hand warmer pockets, two small front cargo pockets, two inside pockets, leather cuffs, leather waistband, lamb’s wool removable liner, collar, and hood.
Custom wool bibs and jacket for severe weather
Custom wool hooded Great Coat for extreme weather
Custom silk lined leather drover’s coat with hood & removable lamb’s wool liner for wet/rainy times/area
Custom boots: Two pairs custom 18” shotgun boots w/vibram soles. Pair of custom leather lamb’s wool lined over boots with insulated rubber bottoms. Two pairs custom moccasins, one lined, one unlined. Pair of NEOS over boots.
Custom hat: Wide-brimmed leather hat w/silk lining. Leather sweatband attached chin strap. Neck warmer attachment, crown warmer, and waterproof cover.
Custom gloves: Two pairs custom light leather gloves, two pair medium leather gloves w/twill lining, two pair of fur lined heavy leather gloves, pair of heavy fur mittens. Plus 6 pairs of plain jersey gloves
Custom suspenders: All leather H-pattern button on suspenders w/derringer holster on each side.
Custom pants belt: 2” Leather with brass buckle for derringer. 18” inner zip pouch.
Just my opinion.
Jerry D Young
|The Following User Says Thank You to Jerry D Young For This Useful Post:|
Offer a poor man's drilling to go with it. 2 rifled 12 ga's barrels over a 30.06.
|The Following User Says Thank You to drobs For This Useful Post:|
Sort of a just for fun type of firearm.
Imagine the following: You get a replacement, longer barrel for a Glock, the pistol, with the longer barrel fits into a dummy housing that replicates any of a number of submachineguns.
Suppose a pistol fit into a dummy housing similar to this hinge opening submachinegun.
This way you'd have a legal rifle with the look and feel of a submachinegun, still fed from it's pistol grip, with a dummy magazine forward, but at least within the package that doesn't provide an awkardly long barrel extending way, way beyond the firearm. (Actually, the dummy housing.)
A monocular style eye piece that is hooked up to my guns pictinny rail, that acts as a sight, and has nightvision capabilitys.
Could shoot accuratly around corners, and would be much cheaper than a nightvision scope.
Use something like a camera for your car that is for backing up, I have seen several on ebay for around 30$ and they have nightvision, but mount it on your gun, and have a wire going from it to a very small screen that you could mount like an eye piece/monocle.
Not sure the range of vision, but it would definatly be handy for corners, and much cheaper than a night vision scope.
I want Mossberg to make a .308 version of their 5.56 MVP predator that uses G3 mags. The Ruger gunsite was a good idea, but poor implementation.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Firearm Cleaning and Loading Accessories||Jay8541||For Sale||1||03-16-2013 07:59 AM|
|Need some firearm accessories advice||WatchingInOR||Firearms General Discussion||12||02-11-2013 06:16 PM|
|Political Stock Market Trader Tries To Manipulate Market||blackkitty||Political News and Discussion||3||11-05-2012 05:09 PM|
|$12.50 for $25.00 Worth of Brownells Firearm Accessories at Brownells.com!||GearHog||GearHog||1||12-03-2011 02:19 AM|
|Were do you get your gun accessories?||kinnisoj||Shotgun Forum||9||02-05-2010 06:20 PM|