Glad to hear! The rim was probably bent when the extractor pulled loose and may not have been the cause of it sticking in the first place. Clean that chamber out good before using it. i always used a brush about the size of the case, maybe a 44 or 45 cal pistol brush if you have something that size. Also try sliding a round in by hand, it should slide all the way in and out without binding. Try a factory round and one of your handloads. Good luck and good hunting.
got my bolt action fixed, man thanks for the advice and tips, the rim was bent where the bolt grabs it, let it soak for a bit in some penetrating out a few taps with a different cleaning rod and it popped right out, thanks a bunch